Your Canon PIXMA MG3620 Setup process will be finished successfully through this process which allows you to complete it within a short time. The all-in-one inkjet printer provides wireless printing, scanning and copying features which make it an ideal home printer solution. The process to start using ij start canon requires you to follow these basic steps.

🔹 Canon PIXMA MG3620 Setup Process

Unbox & Power On
All packaging materials and protective tapes need to be removed. The printer needs to be plugged in before you can press the Power button.

Install Ink Cartridges
The front cover needs to be opened so you can insert the provided ink cartridges into their respective slots. The cover needs to be closed properly.

Load Paper
The rear paper tray needs to be pulled out so you can load plain A4 or letter-size paper. You need to adjust the paper guides.

Download Drivers via ij start canon
You should open your web browser to visit the official ij start canon page. You need to enter your printer model (Canon PIXMA MG3620) to download the recommended driver.

Install Printer Software
You must execute the downloaded file to complete the installation by following the displayed instructions. When the system requests your input select Wireless Setup for connection purposes.

Connect to WiFi
You must press and hold the WiFi button on the printer until the indicator light starts to flash. You need to select your WiFi network from the available list before entering your network password.

Test Print
You need to print a test page after establishing the connection to verify that your Canon PIXMA MG3620 Setup has been completed successfully.

✅ Final Tip

Your printer will function optimally when you install authentic Canon drivers, whereas you should update your printer firmware continuously. 

Your Canon PIXMA MG3620 Setup will be finished within a few minutes by following these steps which enable you to print wirelessly from your home without any difficulties.